After Windows it is Linux's turn: Homylon now has a simple starter pack for Linux too! One download gives you the Engine, the agents for Philips Hue, MQTT and the power of your house, a simple monitor and a first house to start from. And it hasĀ homfigurator: one list to install, start and stop everything, so you do not have to know all the commands.
The pack runs on a PC or mini PC with Linux, and on a Raspberry Pi. There is one for each kind of machine:
PC or mini PC (intel64) Raspberry Pi 64-bit (arm64) Raspberry Pi 32-bit (arm32)
Which one do you need
Ask your machine. Open a terminal and type:
uname -m
| It says | Your machine | Take the pack |
|---|---|---|
x86_64 |
a PC or mini PC | PC or mini PC (intel64) |
aarch64 |
a Raspberry Pi 3, 4 or 5 with a 64-bit system | Raspberry Pi 64-bit (arm64) |
armv7l |
a Raspberry Pi 2, or a Pi with a 32-bit system | Raspberry Pi 32-bit (arm32) |
Took the wrong one? No harm done: homfigurator sees which machine it is on and fetches the right programs from this site.
What is in the pack
- homfigurator: start here. One list with the Engine and every agent for your machine. Choose a line with the arrow keys and press a letter: D installs, R (re)starts, K stops, S shows the status and Q quits.
- The Engine: the heart of Homylon. It runs your house from the rules in your scenes.
- Agents for Philips Hue, for MQTT (Zigbee and Z-Wave through Zigbee2MQTT or Z-Wave JS UI) and for the power use of your house from a P1 dongle on the smart meter.
- home.homylon: your house, with a home.scene to start from.
- The monitor: shows what the Engine does, line by line.
The other agents are in the homfigurator list too: Homey, LG TV, CoAP and Matter. Press D on their line and homfigurator downloads and installs them from this site. You can also download them one by one from the Downloads page.
Good to know: Homylon is software only. It switches and reads your devices, it does not replace them. Without a Hue bridge, a Zigbee stick, a smart meter dongle or other devices on your network there is nothing for it to control. Please read the disclaimer.
How to start
A few commands in a terminal. Copy them as they are. The examples use the pack for a Raspberry Pi 64-bit: use the name of your own pack.
- Download the pack for your machine into your Downloads folder.
- Unpack it in your home folder. That gives you the folder
homylonwith everything in it:cd ~ tar xzf Downloads/homylonstarter-1.2.0-linux-arm64.tgz - Start homfigurator:
cd ~/homylon ./homfigurator - The bar is on the Engine line: press D to install it. It asks for your password once (for sudo).
- Press R on the Engine line. Your house is running.
- For each agent you use: go to its line and press D. Each one asks what it needs the first time. The Hue agent finds your bridge by itself and asks you to press the round button on top of it. The MQTT agent asks where your MQTT broker is. The power agent asks the address of the P1 dongle. Then press R on its line to start it.
Your house is the folder ~/homylon/home.homylon. Open home.scene in any text editor, change it, save it and press R on the Engine line. The Engine runs as you, so it reads your house right there in your own folder. On the monitor line S lets you watch the Engine think.
To start your house when the computer starts, type once:
homylon boot on
and the same for each agent you use, for example homylonhue boot on. The README in the pack tells all of this again. Rather do it all by hand? Your first Homylon house on Linux shows every step.
Remotes on your phone
The Linux Engine works with everything that already talks to Homylon. A good example is the two Android remotes: Lights and blinds for your lamps, rooms and curtains, and the pocket remote with your own buttons. Install them on your phone and give the address of your Linux computer in their settings. See Remotes.
Questions or something that does not work? Tell us on the forum.
PC or mini PC (intel64) Raspberry Pi 64-bit (arm64) Raspberry Pi 32-bit (arm32)